Table of Contents
Advertisement
Swapping the Home City
Time and Dual Time
In the Calendar Mode, you can swap your
Home City time with your Dual Time by holding
down (A) for at least three seconds.
Before swapping
After swapping
Home Time
Dual Time
Dual Time
Home Time
If a swapping operation causes a change in
●
the day indicator setting, the mode hand will
rotate repeatedly.
Hand and Day Indicator Movement
l
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
International Travel
l
Operation Guide 5625
Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Measuring Elapsed Time
Hours
Minutes
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
3.
Press (B) to reset the elapsed time to all
zeros.
Seconds
Hours (24-hour time)
Start
Stop
Resume
Stop
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted when battery power is
●
low.
Setting a Start Time
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Loosen the crown and then pull it out to the
first click.
3.
Rotate the crown to change the
countdown start time setting.
The countdown start time can be set in
●
1-minute units up to 24 hours.
Seconds
Hours
24-hour
Minutes
4.
Push the crown back in and then lock it.
Note
To specify a countdown start time of 24
●
hours, align the small hour and minute
hands with 12 o'clock, so the small 24-
hour hand aligns with 24.
You can also use CASIO WATCHES
●
to configure timer settings.
15
Advertisement
Table of Contents
