Calibration Data Backup To Sd Card - Keysight Technologies X Series Installation Note

PC6 and PC7 CPU Replacement Kit

Calibration Data Backup to SD Card

If you removed the SD card because the instrument did not contain an SD card when it was sent
in for CPU replacement, skip this portion of the installation.
To maintain backwards compatibility, the replacement CPU assembly also has a removable SD
memory card that previous PC6 or PC7 CPUs have.
Since it is unknown if customers have existing processes that assume the calibration data is located
on the SD card, you need to back up the calibration data to the SD card (if it is present).
To do this remove any USB memory devices connected to the instrument, and follow the Backup
process outlined earlier, but this time back up to the default
F:\AlignmentBackupst\N90xxx...location.
Figure 7 Alignment Data Wizard Storage Options for PC6/PC7
14 Installation Note N9020-90248