Keysight Technologies X Series Installation Note page 13
Signal analyzers cpu replacement procedure
Hide thumbs
Also See for X Series:
- Service manual (671 pages) ,
- User manual (502 pages) ,
- Measurement manual (83 pages)
Advertisement
9. If the default location shown is F:\AlignmentBackups... the SD card is present. Click Next and
follow the wizard's on-screen instructions to back up the calibration data.
Figure 6
Alignment Data Wizard Storage Options for PC6/PC7
This completes the Backup operation.
10. After the backup has been completed, the signal analyzer application will be restarted.
Installation Note N9020-90248
PC6 and PC7 CPU Replacement Kit
13
Advertisement
