Keysight Technologies X Series Installation Note page 12

PC6 and PC7 CPU Replacement Kit
8. The content of the next screen displayed depends on the Processor assembly type.
If the instrument has a PC6S or PC7S Processor Assembly, then the screen contains the
selections shown in
The available storage location options are as follows:
— Internal Flash is the Calibration Backup memory in the A4 Processor assembly. For
PC6S/PC7S, this is the default location, and the Internal Flash selection will only appear if
the instrument has PC6S or PC7S. Click Next to back up to the Internal Flash
— External Removable Drive: This will default to F:/AlignmentBackups... if the removable SD
memory card is present in the A4 Processor assembly. See
Figure 5 Alignment Data Wizard Storage Options for PC6S/PC7S
12
Figure 5.
Figure 6.
Installation Note N9020-90248