Monitoring The Heart Rate - Technogym Artis Run User Manual

Monitoring the heart rate

The equipment is able to measure heart rate trends, in two different ways:
- with a device applied to the central handgrip (hand sensor), that switches on when
you grip the handgrip in the sensor region;
- with a chest band with a heart rate transmitter (Polar H7).
There must be no more than one transmitter within the range of the receiver: otherwise
the receiver may receive different signals at the same time and give incorrect heart
readings. If there are several equipment units with heart rate receivers in the same
area, the recommended minimum distance between them is 80 cm.
Heart rate readings will not be accurate near electromagnetic radiation sources (TVs,
cellphones, etc.).
Should you have any doubts about the accuracy of the readings, contact the Technical
Support Service.
32
Run Artis