Monitoring The Heart Rate - Technogym RUN 1000 User Manual

Monitoring the heart rate

The equipment is able to measure heart rate trends,
in two different ways:
- with a device applied to the handle (hand
sensor), that switches on when you grip the
handles in the sensor region;
- with a chest band with a heart rate transmitter (Polar T31).
There must be no more than one transmitter in the reception range: otherwise the receiver
may receive different signals at the same time and give incorrect heart readings. If there
are several equipment units with heart rate receivers in the same area, the recommended
minimum distance between them is 80 cm.
Heart rate readings will not be accurate near electromagnetic radiation sources (TVs,
cellphones, etc.).
Should you have any doubts about the accuracy of the readings, contact the Technical Support
Service.
Run 1000
Run 1000 - Run 600 Excite
Run 600
35