Table of Contents
Advertisement
8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Smart Switch Hardware Installation Guide
4. Verify that the package contains the following items:
• Switch
• Power adapter and power cable (varies by region)
• Rubber footpads for tabletop installation
• Wall-mount installation screws (2) and washers (2)
• Installation guide
If any item is missing or damaged, contact your local NETGEAR reseller for replacement.
Step 4: Install the switch
You can install the switch on a flat surface or attach it to a wall.
You can also use any off-the-shelf 3.94 in. (100 mm) VESA standard mount to secure
the switch to a wall, a pole, or another surface.
Install the switch on a flat surface
The switch ships with four self-adhesive rubber footpads.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the
switch.
The rubber footpads cushion the switch against shock and vibrations. They also
provide ventilation space between stacked switches.
Wall-mount the switch horizontally
The bottom panel of the switch provides two VESA mount holes at an exact distance of
3.94 in. (100 mm), center-to-center, so that you can mount the switch horizontally to a
wall. The switch ships with wall-mount screws and anchors that you can secure to a wall
and attach the switch to.
To mount the switch horizontally to a wall:
1. Locate the two VESA mount holes on the bottom panel of the switch.
2. Mark the holes on the wall where you want to mount the switch.
The holes must be 3.94 in. (100 mm) apart, center-to-center.
3. Drill holes into the wall for four anchors in which you will insert M4 x L25 mm screws.
Installation
23
Hardware Installation Guide
Advertisement
Table of Contents
