Dsc Task Mode (Multiple); D Software Key Functions; D Task List - Icom IC-M803 Instruction Manual

7
DSC OPERATION

■ DSC Task mode (Multiple)

If Multiple Task is enabled, the transceiver can hold
up to 7 tasks. You can make more than 2 DSC tasks
simultaneously by switching between the tasks.
(Example: After transmitting a Group call)
To use Multiple Task mode, select "Multiple" in
"Procedure" on the Menu screen.
[MENU] > DSC Settings > Procedure
When Multiple Task mode is activated,
displayed on the Main screen.
NOTE: The Task mode has a Time-out Timer (TOT)
function. After a certain time has passed without any
operation on a task, the transceiver automatically
exits the Task mode and returns to the Main screen.
When a Time-out Timer activates, an alarm sounds
and a countdown message is displayed for 10
seconds. No alarm sounds and no countdown
message is displayed before the Radio Telephone
TOT activates.
You can set the TOT function in the Inactivity Timer
menu. (p. 63)

D Software Key functions

While in the DSC Task mode, the following functions
are displayed first.
Function
Push to delete the task and return to the
Standby
Main screen.
mode
Task List Push to display the Task list.
Push to delete the task and display the
DEL Task
Task list.
Push to hold the task and display the Task
Hold
list.
Resend Push to resend the call.
28
is
Description
The following functions may be displayed, depending
on the call type.
Function
Cancel Push to send a Cancel call.
Push to pause the 'Call Repeat' mode, or
Pause
pause the countdown.
Resume Push to resume the countdown.
Push to exit the Distress Cancel
Finish
Statement screen.
Push to display the Distress Call History
History
screen.
Push to send an Acknowledgment without
ACK/
ACK (able) any changes.
ACK Push to send an Acknowledgment, but you
(Unable)
cannot make a call.
Send an Acknowledgment. You can specify
ACK
(New CH) the Voice Communication frequency.

D Task List

When one or more tasks are held, you can display the
Task List screen by pushing
tasks is displayed at the top of the screen.
L Push to enter the Task mode.
L Push to display the detail of the selected
task.
Description
. The number of