D Receiving A Distress Acknowledgment; D Receiving A Distress Cancel Call - Icom IC-M803 Instruction Manual

D Receiving a Distress Acknowledgment

When a Distress Acknowledgment is received:
• The emergency alarm sounds until you turn it OFF.
• "Received Distress ACK" is displayed.
1. Push to turn OFF the alarm.
2. Push
• One of the Emergency Frequencies is automatically
selected. Monitor it because a coast station may
require assistance.
• Rotate [CH/GRP] to confirm the call contents.
L See pages 27 and 28 for details of the Software Key
functions in the DSC Task mode.
3. Push , and then
the Main screen.
.
Rotate
to return to

D Receiving a Distress Cancel call

When a Distress Cancel call is received:
• The emergency alarm sounds until you turn it OFF.
• "Received Distress ACK" is displayed.
1. Push to turn OFF the alarm.
L When "Accept after 10 sec." or "Ignore after 10 sec."
is selected in "CH Auto Switch" setting, the countdown
is displayed on the bottom of the window. (p. 58)
After 10 seconds have passed since
pushed, the screen will move to the DSC Task screen,
or return to the Main screen.
2. Push the Software Key below the intended
operation.
: Ignores the call and returns to the Main
screen.
: Puts the RX task on hold, and returns
to the Main screen.
: Pauses the countdown.
: Enters the DSC Task mode immediately.
• One of the Emergency Frequencies is automatically
selected. Monitor it because a coast station may
require assistance.
• Rotate [CH/GRP] to confirm the call contents.
L See pages 27 and 28 for details of the Software Key
functions in the DSC Task mode.
► Continued on the next page
7
DSC OPERATION
is
Rotate
7
45