D Receiving A Geographical Area Call - Icom IC-M803 Instruction Manual

• Monitor the Voice frequency that the calling station
specified.
L Rotate [CH/GRP] to confirm the call contents.
L See pages 27 and 28 for details of the Software Key
functions in the DSC Task mode.
3. Push , and then
the Main screen.
TIP: When you push
countdown will be paused. Push
resume the countdown.
Rotate
to return to
in step 2, the
to

D Receiving a Geographical Area call

When a Geographical Area call is received:
• The emergency alarm sounds until you turn it OFF.
• "Received Geographical" is displayed.
1. Push to turn OFF the alarm.
L When "Accept after 10 sec." or "Ignore after 10 sec."
is selected in "CH Auto Switch" setting, the countdown
is displayed on the bottom of the window. (p. 58)
After 10 seconds have passed since
pushed, the screen will move to the DSC Task screen,
or return to the Main screen.
2. Push the Software Key below the intended
operation.
: Ignores the call and returns to the Main
screen.
: Puts the RX task on hold, and returns
to the Main screen.
: Pauses the countdown.
: Enters the DSC Task mode immediately.
• Monitor the Voice frequency that the calling station
specified.
L Rotate [CH/GRP] to confirm the call contents.
L See pages 27 and 28 for details of the Software Key
functions in the DSC Task mode.
► Continued on the next page
7
DSC OPERATION
is
Rotate
7
51