Removing The Normal Burner/Accusimmer Switch - Whirlpool RF196LXK Technical & Service Manual

REMOVING THE NORMAL BURNER/
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
CAUTION: When you work on the electric
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
1. Turn off the electrical supply going to the
range.
2. Pull the knob off the Normal Burner/
AccuSimmer switch and remove the two
screws.
Screws
ACCUSIMMER SWITCH
3-3
3. Pull the range away from the wall so that
you can access the rear panel.
4. Remove the eight screws from the rear
panel and remove the panel (see step 4 on
page 3-2).
5. Remove the wires from the Normal Burner/
AccuSimmer switch terminals and remove
the switch.
1-White
A-Orange
Normal Burner/
AccuSimmer Switch
2-Violet
B-Blue