Backplane Bus; Licence Information - Lenze C520 Commissioning

3.4

Backplane bus

The I/O system 1000 can be directly connected to the integrated backplane bus. The individual
modules of the I/O system are parameterized in the »PLC Designer«.
Only EPM-Sxxx I/O compound modules from hardware version 1B onwards are
supported.
Detailed information on the I/O system 1000 can be found in the corresponding
documentation: www.Lenze.com à Downloads
When using I/O terminals on the backplane bus, the EPM-S701 power supply
module is required as the first module.
3.5

Licence information

Lenze Software may contain software elements that are licensed as free
software or open source. The licensing terms and conditions of the open source
software components used in this product can be found in the "License"
directory on the SD card included in the product.
Product information
Backplane bus
13