Fan Speed Alarms; Environmental Sensor Alarm; Link And Sdp Alarms; Media Ethernet Link Alarms - Oracle Acme Packet 1100 Hardware Installation And Maintenance Manual

Fan Speed Alarms

The following table lists the fan speed alarm.
Table A-3 Fan Speed Alarm Information (cont.)
Alarm Name Alarm
FAN
STOPPED

Environmental Sensor Alarm

The following table lists the environmental sensor alarm.
Table A-4 Environmental Sensor Alarm Information (cont.)
Alarm Name
ENVIRONME
NTAL
SENSOR
FAILURE

Link and SDP Alarms

Link alarms are generated when a network cable is plugged into or unplugged from a
configured network interface. For each possible network interface, an alarm exists that
indicates whether the link goes up or down.
The following tables list detailed information about the Acme Packet 1100 link alarms,
including their ID assignments, severities, causes, log messages, and messages printed in the
graphic display window.

Media Ethernet Link Alarms

The following table lists the Ethernet interface link up/link down alarms.
Alarm Severity
ID
65537 CRITICAL: any fan speed is
<50%.
MAJOR: speed of two or more
fans is
> 75% and < 90%. Or speed of
one fan is >50% and <75% and
the other two fans are at normal
speed.
MINOR: speed of one fan> 75%
and <90%, the other two fans are
at normal speed
Alarm Alarm Severity Cause(s)
ID
65539 CRITICAL The environmental
sensor component
cannot detect fan
speed and
temperature.
Link and SDP Alarms
Causes Example Log Graphic Display
Message Window
Message
Fan Fan speed: Fan stopped
failure. XXXX XXXX
XXXX
where xxxx
xxxx xxxx is
the revolutions
per minute
(RPM) of each
fan on the fan
module
Example Log Graphic Display
Message Window
Message
Hardware monitor HW Monitor
failure! Unable to Fail
monitor fan speed
and temperature!
Appendix A
A-2