Lf 2 Spec Calibration - KERN EOB Series Service Manual

Calibration procedure completed and the scale will return
back to weighing mode automatically

LF 2 Spec calibration

Press to enter
Confirm display of [ECF 1] with
Internal value
Press to confirm
A : Metric Units
B : American Units 0 : None 1 : lb
C : Fixed to 0
D : PCS
E : Duo range
F : Calibration Unit
1 : Metric units as calibration unit, single calibration
2 : American units as calibration unit, single calibration
3 : Metric units as calibration unit, two sections calibration
4 : American units as calibration unit, two sections calibration
※ The scale will not allow to continue to the next setup step
if an error has occurred during the programming
Press to confirm
Switch to the next digit to the right with
Increase number with
Press to confirm
- 16 -
. [CAL Z] is displayed.
0 : None 1 : kg
0 : Off 1 : On
0 : Off 1 : Multi interval
.
.
EOB-B_EOE-B_EOS-B-SH-e-1911
A B C D E F