Monitoring Of Test Resources; Basic Safety Precautions; Pay Attention To The Instructions In The Operation Manual; Personnel Training - KERN EOB Series Service Manual

Monitoring of Test Resources

In the framework of quality assurance the measuring-related properties of the balance and, if
applicable, the testing weight, must be checked regularly. The responsible user must define a
suitable interval as well as type and scope of this test. Information is available on KERN's
home page (www.kern-sohn.com) with regard to the monitoring of balance test substances
and the test weights required for this. In KERN's accredited DKD calibration laboratory test
weights and balances may be calibrated (return to the national standard) fast and at moderate
cost.

Basic Safety Precautions

Pay attention to the instructions in the Operation Manual

Carefully read this operation manual before setup and commissioning,
even if you are already familiar with KERN balances.

Personnel training

The appliance may only be operated and maintained by trained personnel.

1 Transport and storage

Testing upon acceptance

When receiving the appliance, please check packaging immediately, and the appliance itself
when unpacking for possible visible damage.

Packaging / return transport






- 6 -
Keep all parts of the original packaging for a possibly required
return.
Only use original packaging for returning.
Prior to dispatch disconnect all cables and remove loose/mobile
parts.
Reattach possibly supplied transport securing devices.
Secure all parts such as the glass wind screen, the weighing pan,
power unit etc. against shifting and damage.
EOB-B_EOE-B_EOS-B-SH-e-1911