Basic Information (General); Proper Use; Improper Use; Warranty - KERN EOB Series Service Manual

Basic Information (General)

Proper use

The balance you purchased is intended to determine the weighing value of material to be
weighed. It is intended to be used as a "non-automatic balance", i.e. the material to be weighed
is manually and carefully placed in the centre of the weighing pan. As soon as a stable weighing
value is reached the weighing value can be read.

Improper Use

Do not use balance for dynamic add-on weighing procedures, if small amounts of goods to be
weighed are removed or added. The "stability compensation" installed in the balance may
result in displaying an incorrect measuring value! (Example: Slowly draining fluids from a
container on the balance.)
Do not leave permanent load on the weighing pan. This may damage the measuring system.
Impacts and overloading exceeding the stated maximum load (max) of the balance, minus a
possibly existing tare load, must be strictly avoided. Balance may be damage by this.
Never operate balance in explosive environment. The serial version is not explosion protected.
The structure of the balance may not be modified. This may lead to incorrect weighing results,
safety-related faults and destruction of the balance.
The balance may only be used according to the described conditions. Other areas of use must
be released by KERN in writing.

Warranty

Warranty claims shall be voided in case

Our conditions in the operation manual are ignored

The appliance is used outside the described uses

The appliance is modified or opened

Mechanical damage or damage by media, liquids, natural wear and tear

The appliance is improperly set up or incorrectly electrically connected

The measuring system is overloaded
EOB-B_EOE-B_EOS-B-SH-e-1911 - 5 -