Calibration Of Built-In Weight (Ref Cal) - KERN PNJ Service Manual

7.3 CALIBRATION OF BUILT-IN WEIGHT (REF CAL)

•
Following does not describe the procedure of ordinary
•
This is the procedure of Calibration of the built-in
scales.
• lt is necessary to adjust the linearity of the scale
beforehand. Refer to
• The scale must be set to the non-verifiable
mode.
- 15 -
- AJ(H)-CE TYPE -
4-6.
span adjustment.
weight of AJH-CE
PNJ_PNS-SH-e-2011