Falcon 1092 Continental User's Manual & Installation Instructions page 23

Check the appliance is electrically safe and gas sound when you have finished.
You will need the following equipment to complete the
cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with gas
through a flexible hose, a stability bracket or chain must
be fitted.
These are not supplied with the cooker but are
available at most builders' merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4. Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7. Spirit level
8.
Pencil
9. Adjustable spanner
10. Screws for fitting stability bracket
11. 4 mm & 3 mm Allen keys
12. 13 mm spanner or socket wrench
INSTALLATION
Checking the parts:
6 pan supports
Deluxe grill tray & trivet
ArtNo.324-0025
- CornuFe deluxe oven tray
Plinth
ArtNo.350-0007 - Plinth USA
19
Wok cradle
4 flat shelves
Stability location beacket