Table of Contents
Advertisement
programming is done directly on the front panel of the Delta-88. The Delta-88 has a built-in
library of several source and room names. You may choose to use these names or create your
own. Since each character needs to be individually changed, if you are creating your own
labels, it will be easiest to initially select a label that is close to your desired label. If you are
using several Delta-88s, each Delta-88 will need to be programmed. If you have paid for
programming, your Delta-88 may already be programmed with the room and source names
you provided ADA. Should any of the names need to be changed follow these steps.
Source Labels
1
Turn on one room by pressing a room button and then a source. The Delta-88 will
"POWER UP" and this will take a few seconds.
2
Press and hold the LABEL button until its LED is lit.
3
Repeatedly press the PRESET button until the source display reads "MODE 1 LABEL".
4
To label a source button, select the source you wish to label by pressing its button. Please
note that the Delta-88 will automatically time out of the program (label mode) in five
seconds when no buttons are pressed. If this occurs, you will need to reenter this mode
by pressing and holding the LABEL button.
5
Use the TREBLE UP button to scroll through the Delta-88's built-in source library listing.
If you pass a desired label, use the TREBLE DN button to go back to it.
6
If the source name is perfect as it appears, continue labeling the additional seven sources
starting with step 4. If you wish to alter the current source label, press the VOL UP
button to position the cursor (flashing dot) under the first character you wish to change.
If you passed the first character, pressing the VOL DN button will move the cursor
backward.
7
Use the BASS UP button to advance through the characters until the desired letter or
character appears. If you pass the character, you can use the BASS DN button to go back
to it.
8
Use the VOL UP button to advance to the next character and repeat step seven.
9
When the source label is perfect, repeat the labeling for all seven additional sources
following step 4.
Room Labels
1
Turn on one room by pressing a room button and then a source. The Delta-88 will
"POWER UP" and this will take a few seconds.
2
Press and hold the LABEL button until its LED is lit.
3
Repeatedly press the PRESET button until the source display reads "MODE 1 LABEL".
4
To label a room button, select the room you wish to label by pressing its button. Please
75
Hide quick links:
Advertisement
Table of Contents
