Ada Delta-88 Manual page 117

VCRs
To select a laser disc player, simply press the VCR 1 or VCR 2 button.
The keypad will display VCR 1. Also, the red LED above the VCR
1 button will illuminate. This function may not turn on your TV or
projector. Your TV must be set to a video input in order to view the
VCR. Consult with your installer in order to determine how the TV
or projector function in your system.
Depending on your VCR, you may need to turn the VCR on even
POWER ON/OFF
FM AM TV VCR VCR LASER CD CASS
2
1
TREBLE
VOL BASS
UP
UP UP
SHIFT
VOL BASS TREBLE ROOM OFF
DN DN DN OFF
load a tape. Permit a few moments for this function to happen.
Every time a control button is pressed, the VCR is sent a command
from the ADA Delta System. The system will send a conformation signal back to the keypad,
indicating that it told the VCR to perform that function. The keypad will read the function
performed. Unlike the MT-3000 Multi-Tuner, this response is not based on direct information
from the VCR itself. All but a few VCRs provide actual computer data which can be read by
the Delta System. Please note, due to the nature of source technology, not just VCRs but also
CD players, laser disc players, and cassette players, the command may sometimes be inter-
rupted. You may, on occasion, need to repeat the control command even though the Keypad
confirmed the first request.
FAST FORWARD
FM AM TV VCR VCR LASER CD CASS
1 2
TREBLE
VOL BASS
UP
UP UP
SHIFT ROOM OFF
VOL BASS TREBLE
DN DN DN OFF
Appendix E continued
The Delta System Quick User's Guide
after selecting it. By pressing the VCR 1
button again, a power on/off command is then sent to the VCR.
While the only way to be certain that the VCR is on is by looking at
the unit itself, you may also be able to
determine if the unit is on by looking at
the screen. Many screens will be blue if
the VCR is on and dark if it is not. Once
you have the VCR on, press the
ton. Please bear in mind, that it takes
some VCRs as much as fifteen seconds to
The or buttons will cause the VCR to fast forward or rewind
if the VCR is in stop. On some VCRs, if the
scan while the VCR is in play. Please note, either way when
buttons are pressed the keypad's display will read FAST FOR-
WARD or FAST REWIND.
Pressing the button will stop the VCR.
The will pause the VCR. The
button will most likely not perform any
function for your VCR. Consult with
your installer to determine what func-
tions are available on your system.
but-
117
VCR 1
VCR
FM AM TV VCR LASER CD CASS
2
1
TREBLE
VOL BASS
UP
UP UP
VOL BASS TREBLE SHIFT ROOM OFF
DN DN DN OFF
PLAY
VCR
FM AM TV VCR LASER CD CASS
2
1
VOL BASS TREBLE
UP UP UP
VOL BASS TREBLE SHIFT ROOM OFF
OFF
DN DN DN
or buttons will
or
PAUSE
VCR
FM AM TV VCR LASER CD CASS
2
1
VOL BASS TREBLE
UP UP UP
VOL BASS TREBLE SHIFT
ROOM OFF
DN DN DN OFF