Toe - Kioti DK65 Manual

Select rear ballast carefully.
Add weight to rear wheels if needed to improve trac-
tion or for stability. Amount of rear ballast should be
matched to job and ballast should be remove when it
is not needed. Rear wheel weights are available or
liquid may be added to the tires. Consult your KIOTI
Dealer for the correct ballasting necessary for your
particular application.
Inflation Pressure
Classification Tire Size
AG Front 9.5x24R1
16.9x30R1
Rear
TURF Front 31x13.5x15
Rear 44x18.0x20
14x17.5
IND. Front
Rear 18.4x24
6.5 Toe-in
Front distance should be 2 to 8mm (0.078 to 0.3112
in.) less than rear distance [C.D - A.B]
To adjust toe-in loosen the lock nut and adjust the
length of the tie rod until proper toe-in measurement
is obtained. Retighten the lock nut.
Inflation Pressure
2
210kPa(2.1kgf/cm , 30psi)
196kPa(1.9kgf/cm 2 , 28psi)
315kPa(3.1kgf/cm 2 , 45psi)
2
210kPa(2.1kgf/cm , 30psi)
280kPa(2.8kgf/cm 2 , 40psi)
224kPa(2.2kgf/cm 2 , 32psi)
- 40 -
623O606A
623O607A