This user manual contains important safety, performance, and service information. Please read the user manual before starting to use your new Giant Power Pro and keep it for future reference. For your safety, we recommend that you to focus on your surroundings while riding. Avoid staring at the computer screen.
Charging cable Download Giant Cycling Power App The Giant Cycling Power App is available for Apple® iOS and Android system*. Please go to the App Store or Google Play to search Giant Cycling Power App and download it. * Android system must be Android 4.4 or higher version.
Step 1: Prepare the charging cable, as shown figure 1. Step 2:Attach the charging cable to the Giant Power Pro. The indicator light will be red light constantly while charging is in progress, as shown figure 2 Figure 2...
Page 6
3-2 The M3 bolts are on the crank set for tightening the Giant Power Pro. The correct torque value is 3 Step 4: Wake up the Giant Power Pro, as shown figure 4.
Pairing Giant Power Pro Before pairing, please make sure the battery of Giant Power Pro is charged. Wake the Giant Power Pro by rotating the crank arms one time in clockwise or counterclockwise direction and put the bike in horizontal position as described at step 4 and 5.
Before the calibration, please make sure the procedure of pairing with Giant Power Pro/Giant Power and computer is finished. Please refer to technical manuals of the cycling computer to calibrate the Giant Power Pro with cycling computer. The procedures may differ between various computers.
Warning: Only to clean the covers of the Giant Power Pro. Please do NOT disassemble the Giant Power Pro this will void your warranty. Warning: Please only clean the cover of Giant Power Pro with a clean cloth and water. Please do NOT use corrosive detergent to clean as it may damage the cover.
Q2: I can’t pair my Giant Power Pro with computer. A1: Please check if the battery level of the Giant Power Pro is sufficient, if it is not enough, please charge A2: Please confirm if the Giant Power Pro is awoken successfully.
Giant limited warranty Giant warrants it’s Giant Power Pro for a period of one (1) years from the date of purchase for the original owner only. This warranty applies only to this product when purchased new from an Authorized Giant Dealer and assembled by that dealer at the time of purchase.
Appendix A: Basic Operation of Giant NeosTrack computer 1. BACK / STOP • Press to return to the previous page or cancel an operation. • When recording, press to pause recording. Press it again to stop recording. 2. OK / LAP •...
Appendix c: calibration procedures with SmartPhone App 1. Press to enter Parameter page 2. Press 3. Press 4. Calibration completed CAUTION: If you encounter difficulties, please visit: https://www.giant-bicycles.com/support...
Page 14
FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 15
Translation: “This equipment contains specified radio equipment that has been certified to the Technical Regulation Conformity Certification under the Radio Law.” Hereby declares that under our sole responsibility, the products Giant Power Pro, comply with the provisions of Directive 2014/53/EU.
Need help?
Do you have a question about the Power Pro-R and is the answer not in the manual?
Questions and answers