更換阻尼棒 Damper Cartridge Replacement - Giant Crest 34 Instruction Manual

更換阻尼棒 Damper Cartridge Replacement
1
將 LSC 調至 Open 的位置，取下螺絲並將螺絲旋入 2~3 圈，使用膠槌敲打，分離下連桿與
下叉腳
Open the LSC.
Remove bolt the damper side bolt. Loosen the bolt two or three turns and use a plastic mallet to
gently tap it out.
2
使用一字起子拆開阻尼側上蓋
Gently pop the LSC cap off using a flathead
screwdriver.
註：小心裡面的鋼珠
Note: When removing cap, be careful not to lose
steel ball bearing and spring located underneath.
3
夾起鋼珠及彈簧
Carefully remove the the steel ball bearing and spring and set aside in a safe place.
17