XYZ Printing da Vinci Color mini User Manual page 16

Function Operation and Instructions
Filament
D3
Refer to the Change Filament function in the main screen.
WiFi
D4
Before turning on the printer
and setting up the WiFi network,
please insert the WiFi dongle
into the USB port on the top of
printer.
1. Tap ADD and the printer will
start to search for available
access points.
Use the XYZprint to establish WiFi connection
1. Use a USB cable to connect the printer to the computer and run the XYZprint.
Check if the WiFi function is activated on the computer and connect to the access point.
●
2. After the printer operation
function window opens, select
"Dashboard">"Setup">, click on
"Wireless " to enter the wireless
network setup screen.
6. After the screen shows
completing WiFi setup, click
"Confirm".
* Please refer to the XYZprint user manual.
For more information on software update, operation instructions and technical supports, please visit the XYZprinting
official website: http://www.xyzprinting.com/
Unused filament for one day of longer should be stored in zip-lock bag.
2. Tap the access point to be
used.
3. Click "TURN WIFI BACK
ON"
7. Then connect the printing machine name above to
the COM port, pull down the menu to the same new
connection wireless network, click "Back".
3. Enter the password for the
access point.
4. Please select a wireless
network name that you
want to connect to and
click twice.
4. Confirm the connection is
completed.
5. Then enter the password
and click on"Connection"
to wait for the connection.
8. Once the connection
method has been changed
from USB to Wi-Fi, you
can unplug the USB cable
and continue with the
printing process.
da Vinci Color mini
P16