XYZ Printing da Vinci Color mini User Manual page 14

Function Operation and Instructions
D. Setting
D1
D2
D3
D1-1 Print-Bed
1. Select Calibration.
3. Wait while the sensor measures the height of the print bed at three different locations. Once the
measurement is complete, the printer will automatically level the print bed.
Caution: Please ensure the EZ Removable Rubber Magnet had placed in the printbed.
D1-2 Print-Bed
1. Tap Z-offset.
D1-3 Print-Bed
D4
D6
D8
Calibration (leveling)
2. Confirm the operation.
Z-offset
2. Move the print head to thecenter of the print bed. Use a busi-
ness card to check the distance between the nozzle and the print
bed. It is recommended that the space between the print head
and the print bed just touch and the nozzle can move smoothly
on the print bed.
Jog Mode
1 2 3
D5
D7
D9
Jog mode lets manually move the print head via the touch
screen.
How to move the print head:
1. Move along the X-axis.
2. Move along the Y-axis.
3. Move along the Z-axis. (Do not increase/shift upwards when
print head at home position avoid hitting the print bed.)
4. After the calibration is
successfully completed, tap to
confirm.
3. Users can tap the icon to
higher or lower the print bed,
the higher value the bigger
distance and vice versa.
da Vinci Color mini
P14