Menu Functions; Figure 3-2 Menu Screen - Will Burt PositionIt PI-35 Operator's Manual

I PI-35
OSITION T
P
Panning and Tilting
When moving the positioner with the joystick, arrows pointing in the direction of the movement
will display in the lower right corner of the LCD screen. The greater the lean of the joystick, the
faster the movement. Viewed from the front, clockwise movement is to the left, and
counterclockwise movement is to the right.
When panning and tilting, the joystick functions as follows:

When the joystick is pushed forward, the positioner will tilt forward. An arrow will appear
pointing forward (

When joystick is pulled back, the positioner will tilt back. An arrow will appear pointing
back ( ) on the LCD screen.
▼

When the joystick is moved to the right, the positioner will rotate to the right. An arrow
will appear pointing right (

When the joystick is moved to the left, the positioner will rotate to the left. An arrow will
appear pointing left (

It is possible to simultaneously adjust both the pan and tilt of the positioner by moving
the joystick towards a diagonal. Arrows for both applicable directions will appear on the
LCD screen. For example, when tilting forward and panning right, both an arrow pointing
forward and an arrow pointing right will appear (
The positioner will continue to move in the direction given by the joystick until the joystick is
released or centered, or the positioner reaches one of its limits. Note that the positioner motor
and gearbox assemblies are designed to be stalled when they hit an obstruction, but that
continuous abuse will cause damage.

3.3.3 Menu Functions

The controller has been designed to use the joystick as the primary controller for menu function.
To access menu functions:
1. Ensure power is on to the system.
2. Press [Menu] for (2) seconds. The Menu screen (Figure 3-2) will appear.
3. Use the joystick to navigate through the menu. The number keys can also be used to
assist in navigating through the menu.
Detailed steps of specific menu functions are listed in Section 3 and Section 5.
3-4
▲
) on the LCD screen.
►
) on the LCD screen.
◄
) on the LCD screen.
1. Keyboard setup
2. Dome setup
3. Protocol select
4. Exit menu

Figure 3-2 Menu Screen

▲
).
►
TP-5406201-B
July 2017