Keyboard; Joystick; Figure 3-1 Keyboard Keys - Will Burt PositionIt PI-35 Operator's Manual

3.3.1 Keyboard

The controller contains functions and keys which are not used with the positioner. Keys (Figure
3-1) which are used for operation include:

[Menu] which is used to access menu functions

[Ent] (enter) which is used to make selections within the menu

[Set] which is used in the process to store presets and electronic limit stops

[Pre] (preset) which is used in the process to store presets and electronic limit stops, and
in the process to recall presets

[Mon] (monitor) which is used in the process to change the MonID

[Cam] (camera) which is used in the process to change the CamID

[Prev] (previous) which is used when using the menu to save preset positions, and to
cancel out of a preset without recalling it

[N], where "N" represents a number on the keyboard, which is used to access menu
functions, and as part of the processes to store and recall presets
Menu
Monitor
Camera
Number
Keys

3.3.2 Joystick

The joystick pans and tilts the positioner. The speed of the movement will directly relate to the
lean angle of the joystick.
Menu
When used with menu functions, the joystick controller functions as follows:

Push the joystick forward to move up the menu

Pull the joystick back to move down the menu

When the joystick is moved to the right, the menu will go to the sub menu or save the
setup

When the joystick is moved to the left, the menu will be exited
TP-5406201-B
July 2017

Figure 3-1 Keyboard Keys

I PI-35
OSITION T
P
Set
Preset
Previous
Enter
3-3