VERITAS NetBackup 5330 Hardware Service Procedure page 8
Hide thumbs
Also See for NetBackup 5330:
- Installation manual (102 pages) ,
- Appliance hardware installation manual (90 pages) ,
- Configuration manual (63 pages)
Advertisement
HSP 137 Replacing a disk drive in a Primary Storage Shelf or an Expansion Storage Shelf
5
Push the drive drawer all the way back into the storage shelf and close the levers on each side
of the drive drawer.
6
The Drive Drawer Status Service Action Required LED and the Drive Drawer Status Service
Action Allowed LEDs turn off.
7
The Drive Activity LED for the replaced drive will start to blink as copy back starts.
8
Install the bezel on the front of the storage shelf.
8
Advertisement
