VERITAS NetBackup 5330 Hardware Service Procedure page 3

HSP 137 Replacing a disk drive in a Primary Storage Shelf or an Expansion Storage Shelf
Note: Disk drives are hot-swappable. The storage shelf does not need to be powered down when
replacing a disk drive.
To locate and identify the storage shelf that has the faulty disk drive
1 Remove the bezel of the storage unit.
2 Verify that the unit contains a failed disk drive by checking the Drive Drawer Service Action
Required LED on the front of the drawer. If a fault is detected, the amber Drive Drawer Service
Action Required LED is on.
Number Definition
1 Drive Drawer Status Service Action Allowed LED
2 Drive Drawer Status Service Action Required LED
3 Drive 1 Activity LED
4 Drive 2 Activity LED
5 Drive 3 Activity LED
6 Drive 4 Activity LED
7 Drive 5 Activity LED
8 Drive 6 Activity LED
9 Drive 7 Activity LED
3