VERITAS NetBackup 5230 Appliance Product Description page 7

Appliance features
Table 1-1
Feature
Space reduction
Scalable architecture
High availability
Easy management
System memory
configuration (DIMMS)
RAID levels
The deduplication engine provides up to 100 times reduction in
storage. The client-side plug-in provides similar levels of bandwidth
reduction.
Due to fingerprinting and RAID redundancy, the overall storage
capabilities are not a simple multiplication of the disk size and the
total number of disks.
See "About storage capacity"
Supports the redundant hot-swappable disks and power modules.
Provides separate out-of-band management network interfaces.
You can remotely turn on, turn off, and reset appliances through
the network.
Supports remotely configuring and managing the appliances
through KVM over IP.
Supports the SNMP traps and automatically reports alarms.
Supports reporting the disk information through the out-of-band
management channel.
64 GB, up to a maximum of 192 GBs
Note:
You can purchase additional 64-GB memory kits to
maximize the amount of memory in the NetBackup 5230 Appliance.
You can also use the memory kits to increase the appliance
memory when you add an optional storage shelf to the system.
RAID 1 (standard mirroring) and RAID 6 (block level striping with
double distributed parity) are used as follows:
Appliance system disks: RAID 1
■
Appliance storage disks: RAID 6
■
Storage shelf data storage disks: RAID 6
■
Note:
The disk drives in the appliance are pre-formatted before
the appliance is shipped. These drives should not be moved into
different slots or otherwise rearranged.
Product overview
About the appliance
Description
on page 9.
7