Changing The Timezone Manually; Rpm Database Recovery Procedure - Avid Technology FastServe Live Edit Setup Manual

Click on RAID recovery for the replaced drive.
5. In the following window, select Disk recovery to rebuild one drive only. Or choose Fast
Recovery to perform a quick recovery of your drive.
n
The Disk recovery option rebuilds and restores the replaced drive, but it is a time-consuming process.
Fast recovery is much quicker but it will erase all data from all drives during the rebuilding process.

Changing the Timezone Manually

If you encounter a situation, where you will need to manually change the timezone of your server,
follow the steps listed in this procedure.
(Example) To manually change the timezone:
t
Enter the following commands (changing the timezone for the one you require):
cp /usr/share/zoneinfo/Europe/Warsaw /etc/localtime
ln -s /usr/share/zoneinfo/Europe/Warsaw /etc/localtime

RPM Database Recovery Procedure

When you encounter a RPM DB failure, follow the steps listed in this procedure to recover it.
To recover a corrupted RPM database:
t
Enter the following commands to recover the RPM database after an unexpected failure:
rm -f /var/cores/*
rm -f /var/lib/rpm/__db*
db_verify /var/lib/rpm/Packages
rpm --rebuilddb
yum clean all
71