Table of Contents
Advertisement
Alarms and Maintenance
3. From the elapmaint screen, select Process Control>Stop Software.
The screen shown in
Figure 46: Stop Software Confirmation
4. On the Stop ELAP Software screen, make sure the checkbox is checked as shown in
Software Completion
5. Click the Stop ELAP Software button to stop the software.
The screen shown in
Figure 47: Stop Software Completion Screen
6. Select Process Control>Start Software.
7. From the Start ELAP Software screen, make sure the check boxes are checked as shown in
48: Start ELAP
Figure 48: Start ELAP Software
8. Click the Start ELAP Software button to start the software.
The screen shown in
started:
E76220 Revision 1, July 2016
Figure 46: Stop Software Confirmation
Screen.
Figure 47: Stop Software Completion Screen
Software:
Figure 49: Start Software Completion Screen
General Procedures
appears:
appears.
confirms that the software has
Figure 47: Stop
Figure
114
Advertisement
Table of Contents
