Table of Contents
Advertisement
Alarms and Maintenance
Running the System Health Check
The operator can run syscheck to obtain the operational platform status with one of the following
procedures:
•
Running syscheck from the Command line
•
Running syscheck Through the ELAP GUI
•
Running syscheck Using the syscheck Login
Running syscheck from the Command line
The admusr can use sudo to run syscheck from the command line. This method can be used whether
an application is installed or whether the GUI is available.
1. Log in to the MPS as the admusr:
Login:
admusr
Password:
<Enter admusr password>
2. Run syscheck with any command line arguments.
sudo syscheck
$
For help on command syntax, use the -h option.
Running syscheck Through the ELAP GUI
Refer to ELAP Administration and LNP Feature Activation for more details and information about logins
and permissions.
1. Log in to the User Interface of the ELAPGUI (see
2. Check the banner information above the menu to verify that the ELAP about which system health
information is sought is the one that is logged into.
Figure 7: Login Window
E76220 Revision 1, July 2016
Accessing the ELAP GUI
Maintenance
Interface).
30
Advertisement
Table of Contents
Need help?
Do you have a question about the E5-APP-B and is the answer not in the manual?