Table of Contents
Advertisement
Alarms and Maintenance
After the connection is enabled, the workspace displays the information shown in
LSMS Connection
Figure 21: LSMS Connection Enabled
This procedure is complete.
4. Perform the following substeps to reboot the server if the syscheck Verbose output indicates the
following error:
An active route cannot be found for a configured default route, . .
a) Log in as elapconfig on the E5-APP-B server.
Enter option 6, Platform Menu, from the ELAP Configuration Menu.
/-----ELAP Configuration Menu----------\
/----------------------------------------\
|
1 | Display Configuration
|----|-----------------------------------|
|
2 | Configure Network Interfaces Menu |
|----|-----------------------------------|
|
3 | Set Time Zone
|----|-----------------------------------|
|
4 | Exchange Secure Shell Keys
|----|-----------------------------------|
|
5 | Change Password
|----|-----------------------------------|
|
6 | Platform Menu
|----|-----------------------------------|
|
7 | Configure NTP Server
|----|-----------------------------------|
|
8 | Mate Disaster Recovery
|----|-----------------------------------|
|
e | Exit
\----------------------------------------/
Enter Choice: 6
b) Enter option 2, Reboot MPS, from the ELAP Platform Menu.
At the prompt, enter the identifier of the MPS to which you are logged in (A or B); in this example,
A is used.
/-----ELAP Platform Menu-\
/--------------------------\
|
1 | Initiate Upgrade
|----|---------------------|
|
2 | Reboot MPS
E76220 Revision 1, July 2016
Enabled.
|
|
Platform and Application Alarms
|
|
|
|
|
|
|
|
Figure 21:
66
Advertisement
Table of Contents
