Table of Contents
Advertisement
3
♦ ♦ ♦
C H A P T E R
Software Installation
After you have completed the HBA hardware installation and powered on the system, follow
the instructions in this chapter to install any HBA utilities, firmware, and operating system-
specific drivers, in that order, that might be required by the HBA.
Note -
only be available at the web site if required by the HBA.
This chapter contains the following topics:
"Utilities for Upgrading the BIOS and Firmware " on page 31
■
"Installing Diagnostic Software" on page 36
■
"Installing Drivers" on page 39
■
Utilities for Upgrading the BIOS and Firmware
Use the OneCommand Manager command-line interface (CLI) or the OneCommand Manager
graphical user interface (GUI) to update the BIOS and firmware for the HBA. These utilities
provide support for the following functions:
Discover local and remote hosts, HBAs, targets, and LUNs.
■
Reset HBAs.
■
Set HBA driver parameters.
■
Update firmware.
■
Enable or disable the system BIOS.
■
Run diagnostic tests on HBAs.
■
Manage out-of-band HBAs.
■
Manage local and in-band remote HBAs.
■
3
Software listed in this chapter as being located at the Oracle designated web site will
Chapter 3 • Software Installation
31
Advertisement
Table of Contents
