Recovering From Problems; Restoring The Rtdb From Backup Files - Oracle E5-APP-B Alarms And Maintenance

Alarms and Maintenance

Recovering from Problems

This section describes the following recovery procedures:
•

Restoring the RTDB from Backup Files

• Recovering From Alarms
Restoring the RTDB from Backup Files
This section describes the procedure for restoring the RTDB from backup files.
Note: It is recommended that the RTDB be backed up daily (see section,
For ELAP 8.0 or later, daily backups are created automatically.
Use the following procedure to restore the RTDB from a previously prepared backup file.
Caution:
Contact
1. Contact My Oracle Support
2. Log in to the ELAP command line interface with user name elapdev and the password associated
with that user name.
3. Use the Secure File Transfer Protocol (sftp) to transfer the RTDB backup file, created by the
procedure Backing Up the
/var/TKLC/elap/free/backup
4. Log in to the ELAP GUI (see
5. Select Process Control>Stop Software to ensure that no other updates are occurring.
The screen shown in
E76220 Revision 1, July 2016
My Oracle Support (MOS)
(MOS).
RTDB, to the following location:
Accessing the ELAP GUI
Figure 13: Stop ELAP Software
before performing this procedure.
Interface).
is displayed.
Recovery Support
Daily Maintenance Procedures).
40