Bluetooth Mobile Phone Settings - Kenwood DDX7019BT Instruction Manual

Bluetooth® Bluetooth®
A
: Device used as usual Bluetooth audio
device and at the same time, being able to
used as device for KENWOOD Music Mix.
– Touch to go to <Select Device> screen.
(Page 28)
: Device used for KENWOOD Music Mix.
– (white): Not connected.
– (purple): Connected.
B
: Status of playback device.
– (purple): Current playback device.
– (white): Ready for playback.
– (gray): Not ready for playback.
2
Connect the device to use as a device for
KENWOOD Music Mix.
Touch those icons that light up in white.
• To disconnect, touch the icon again.
3
Select the device to start playback.
Touch those icons that light up in white.
Note:
• Once another device (any other than the device
connected as [ ]) is selected to play music, the
connection is switched to the new selected device.
• When you change to another source from
"Bluetooth", the connection is restored to the device
connected as [ ].
Playback information and key operation
• For playback information, see "Source control screen"
on page 9.
• For key operations on the touch panel, see "Common
operation keys on source control screen" on
page 10.
Selecting a track from the list
1
Display the music list.
On the source control screen, touch as follows:
2
Select the folder, then the item in the
selected folder.
• For details about the list operation, see
page 11.

Bluetooth mobile phone settings

You can change various settings for using Bluetooth
mobile phones on the <TEL SET-UP> screen.
1
Display the <TEL SET-UP> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [TEL
SET-UP].
2
Make the settings.
ENGLISH 33