Kenwood DDX7019BT Instruction Manual page 33

Bluetooth® Bluetooth®
C When item 5 is selected in step 2:
Say the name of the person you want to
call.
• You can also make voice dialing by pressing and
holding the VOICE on the monitor panel.
• Available only when the connected mobile
phone has a voice recognition system.
• If the unit cannot find the target, "Speech
recognition has been completed. To continue
with speech recognition,please press the Restart
button." appears. Touch [Restart], then say the
name again.
• To cancel voice dialing, touch [Stop].
Switching between two connected devices
You can change the device to use when two devices
are connected.
On the phone control screen:
The active device is highlighted.
Presetting phone numbers
You can preset up to eight phone numbers.
1
Display the <Edit Preset Dial> screen.
On the Home screen, touch as follows:
Then, on the phone control screen, touch as
follows:
]  [Edit]
[
2
Select a position to store into.
3
Select a method to add a phone number
to preset list and register the number to
the preset list ( 1 ), then touch [Close] (
[Add Select a phone number from
number from the phonebook.
phonebook]
[Add number Enter a phone number on the
direct] direct number entry screen,
then touch [Set] to add to the
preset list.
• To display the preset list, touch [
control screen.
To delete a phone number from the preset list:
Select the phone number to delete on the <Edit
Preset Dial> screen, then touch [Delete] in step 3.
To delete all phone numbers from the preset list:
Touch [Delete all] on the <Edit Preset Dial> screen
in step 2.
2 ).
] on the phone
ENGLISH 31