Kenwood DDX7019BT Instruction Manual page 39

Settings Settings
2
Touch [Delay] ( 1 ), then adjust the Digital
Time Alignment (DTA) value (
speaker.
Position/DTA
Initialise
Front L Front R
0cm
0cm
0ms
0ms
Rear L Rear R
0cm 0cm
0ms 0ms
Subwoofer
0cm
0ms
E.g. When <X'over Network> is set to [2way]
• To determine the adjustment value, see
"Determining the value for <Position/DTA>
adjustment" on page 39.
3
Touch [Level] ( 1 ), then adjust the output
volume ( 2 ) for each speaker.
Position/DTA
Initialise
Tweeter
0.0dB
Front L Front R
0dB 0dB
Rear L Rear R
0dB 0dB
Subwoofer
0dB
E.g. When <X'over Network> is set to [2way]
To initialize the setting value: Touch [Initialise].
Localizing the sound image—Front Focus
2 ) for each
• Speaker types shown on the screen differ depending
on the <X'over Network> setting. (Page 34)
1
Touch [Front Focus] (
listening position (
position, then touch [Adjust] (
Position/DTA
Listening Position
Delay
Level
Front L
Front All
Priority L
All
Priority L
E.g. When <X'over Network> is set to [2way]
• When you are sitting on the [Front All] (front
seats) or [All] (front and rear seats) position, select
left ("Priority L") or right ("Priority R") to specify
the position to localize the sound image.
2
Touch [Delay] (
image (
Front Focus Adjust
Delay
Level
0.00ms
0.00ms
0.00ms 0.00ms
1 ), select the
2 ) to set as the front
3 ).
Front Focus
Front R
Front All
Priority R
All
Priority R
Adjust
1 ), then adjust the sound
2 ) precisely.
Initialise
Sound Image LR(Front)
Sound Image LR(Rear)
0.00ms
Size of the Virtual Sound Field
Subwoofer Delay
0.00ms
Delay
Level
[Sound Image LR(Front)]
Adjusts the sound image to be localized set on the
front position.
[Sound Image LR(Rear)]
Adjusts the sound image to be localized set on the
rear position.
[Size of the Virtual Sound Field]
Adjusts the virtual sound field to the desired field
size.
• If the sound image moves out of the front
position, adjust [Sound Image LR(Front)]/
[Sound Image LR(Rear)].
[Subwoofer Delay]
Adjusts the delay time of the subwoofer sound.
3
Touch [Level] ( 1 ), then adjust the output
volume ( 2 ) for each speaker.
Front Focus Adjust
Initialise
Tweeter
0.0dB
Front L Front R
0dB 0dB
Rear L Rear R
0dB 0dB
Subwoofer
0dB
E.g. When <X'over Network> is set to [2way]
To initialize the setting value: Touch [Initialise].
Delay
Level
ENGLISH 37