Kenwood DDX790 Instruction Manual

Kenwood DDX790 Instruction Manual

Monitor with dvd receiver
Table of Contents

Advertisement

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty
card, and in the space provided below. Refer to the model and serial numbers whenever you call
upon your Kenwood dealer for information or service on the product.
Model DDX790/DDX770/DDX7070BT/DDX470/DDX4070BT/DDX370/DDX3070 Serial number
US Residence Only
Register your Kenwood product at
© 2012 JVC KENWOOD Corporation
DDX790
DDX770
DDX7070BT
DDX470
DDX4070BT
DDX370
DDX3070
MONITOR WITH DVD RECEIVER

INSTRUCTION MANUAL

Register Online
www.Kenwoodusa.com
GET0907-001A (KN/RN)

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood DDX790

  • Page 1: Instruction Manual

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DDX790/DDX770/DDX7070BT/DDX470/DDX4070BT/DDX370/DDX3070 Serial number...
  • Page 2: Table Of Contents

    Turning off the power ..........11 Adjusting the touch position ......54 Adjusting the panel angle ........11 BLUETOOTH OPERATIONS Adjusting the volume ...........11 (Only for DDX790/DDX770/DDX7070BT/ Putting the unit in standby .......12 Turning off the screen ..........12 DDX470/DDX4070BT) Switching screens ......13 Information for using Bluetooth®...
  • Page 3: Before Use

    – it may obstruct the steering wheel and gearshift lever operations. How to reset your unit – it may obstruct the operation of safety DDX790/DDX770/DDX7070BT devices such as air bags. – it may obstruct visibility. • DO NOT operate the unit while driving.
  • Page 4 The user could lose the authority to operate product relating to laser product safety. this equipment if an unauthorized change or modification is made. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, FCC NOTE HACHIOJI-SHI, TOKYO, JAPAN This equipment has been tested and found...
  • Page 5: Introductions Initial Settings

    • You can also change the settings on the buttons and menu <Setup> screen. ( page 50) items in the selected For DDX790/DDX770/DDX7070BT : language ([Local]: initially selected) or English ([English]). Angle * Adjust the panel angle.
  • Page 6: Update The System

    Updating the system You can update the system by connecting a USB device containing the update file. Create an update file, copy it to a USB device, and connect it to the unit. To connect a USB device, page 82 . On <Top Menu>: Application Updates the System...
  • Page 7: Activating The Security Function

    Activating the security function You can activate security function to protect your receiver system against theft. On <Top Menu>: The security indicator on the monitor panel flashes when the vehicle ignition is off. To cancel, select [OFF].
  • Page 8: Component Names And Functions

    Component names and functions DDX790/DDX770/DDX7070BT 1 Reset button/Power indicator/Security 6 AV button (Press) indicator • Displays the current source screen. • Resets the unit. ( page 3) AV OUT button (Hold) • Lights up while the unit is turned on.
  • Page 9 DDX470/DDX4070BT/DDX370/DDX3070 1 Loading slot For DDX370/DDX3070: 2 0 (Eject) button VOL/ATT knob ( page 11) • Ejects the disc. • Attenuates the sound. (Press) 3 Reset button/Power indicator/Security • Adjusts the audio volume. (Turn) 8 For DDX470/DDX4070BT : indicator • Resets the unit. ( page 3) TEL/VOICE button •...
  • Page 10: Setting The Clock

    Setting the clock Display the <Top Menu> Set the clock time. screen. On the source control screen: NAV * Synchronizes the clock time with the connected navigation unit. Radio Data Synchronizes the clock System time with FM RBDS. Sets the clock manually. below) Display the <Setup>...
  • Page 11: Common Operations

    DDX790/DDX770/DDX7070BT DDX470/DDX4070BT/ DDX370/DDX3070 DDX470/DDX4070BT/ DDX370/DDX3070 Adjusting the panel angle (Only for DDX790/DDX770/DDX7070BT ) The ATT indicator lights up. You can change the panel angle. To cancel the attenuation, press the same Select an angle (0 – 6). button again. To set the current position as the power...
  • Page 12: Putting The Unit In Standby

    Putting the unit in standby Turning off the screen DDX790/DDX770/ DDX7070BT DDX470/DDX4070BT * DDX370/DDX3070 * The screen is turned off. To turn on the screen, press MENU. • You can also turn on the screen by touching the display. This operation works only when <TEL Key Long Press>...
  • Page 13: Switching Screens

    Switching screens Source control screen • Pressing MENU on the monitor panel also displays <Top Menu>. Appears only when a navigation unit is connected. <Top Menu> <Setup> • Changes the AV source. Changes the detailed settings. • Displays the <Setup> screen. •...
  • Page 14: Av Source Operations Selecting The Playback Source

    52 ) Only for DDX790/DDX770/DDX470/DDX370. Only for DDX370: select an appropriate input setting on <External BUS>. ( page 52) Only for DDX790/DDX770/DDX7070BT/DDX470/DDX4070BT . Displaying the source control screen On video playback screen • The operation buttons disappear by touching the screen or when no operation...
  • Page 15: Displaying All Sources And Items

    Menu> screen On <Top Menu>: You can arrange the items to display on the <Top Menu> screen. On <Top Menu>: DDX790/DDX770/DDX470 Select the position to place DDX7070BT/DDX4070BT the icon (1), then select the item you want to display on the selected position (2).
  • Page 16: Disc Operations

    When removing a disc, pull it horizontally. Closing the monitor panel (Only for DDX790/DDX770/ DDX7070BT ) The source changes to “DISC” and playback After removing the disc, press 0 (eject) starts.
  • Page 17: Playable Disc Types

    Playable disc types Disc type Recording format, file type, etc. Playable DVD-Video * Region Code: • For DDX790/DDX770/DDX470/DDX370: 1 • For DDX7070BT/DDX4070BT/DDX3070: 4 DVD-Audio/DVD-ROM DVD Recordable/ DVD-Video Rewritable DVD-VR * (DVD-R/-RW * , +R/+RW * ) DivX * /MPEG1/MPEG2 • DVD Video: UDF bridge •...
  • Page 18: Playback Operations

    Playback operations To display the source control screen, page 14. For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Selects playback mode. [1] [¡] • Reverse/forward search page 21) during playback.* • Plays back in slow- [3 8] Starts/pauses playback. motion during pause. [7]* Stops playback. [MODE]* Enters the <DISC Mode>...
  • Page 19 For CD/MP3/WMA/WAV/AAC Selects playback mode. [4] [¢] Selects a track. page 21) [1] [¡] Reverse/forward search.* Displays the folder/track list. [MODE] * Enters the <DISC Mode> below) settings. ( page 22) [3 8] Starts/pauses playback. [MENU] Displays the <Top Menu> ] [ ]* Selects a folder.
  • Page 20 Video menu operations ZOOM Displays the picture size You can display the video menu screen selecting screen. ( page 48) during video playback. Aspect Selects the aspect ratio. ( • Available items on the screen differ page 48) depending on the types of the loaded disc Picture Displays the picture and playback files.
  • Page 21 • To deactivate the PBC function, press [7] Only for VCD then the direct selecting buttons to select a track number. Selecting playback mode For DVD/DVD-VR For VCD (without PBC)/CD/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC You cannot activate the repeat mode and the random mode at the same time. ZOOM Displays the picture size •...
  • Page 22: Disc Mode> Settings

    73). Language Subtitle Select the initial subtitle language or erase the subtitle (OFF) Language page 73). • Initial for DDX7070BT/DDX4070BT/DDX3070: English, for DDX790/ DDX770/ DDX470/DDX370: OFF Audio Select the initial audio language; Initial English ( page 73). Language Down Mix When playing back a multi-channel disc, this setting affects the signals reproduced through the front and/or rear speakers.
  • Page 23: Usb Operations

    USB operations Playing a USB device • This unit can play JPEG/DivX*/MPEG1/ Cautions: MPEG2/MP3/WMA/WAV/AAC files stored in • This unit may not play back files in a a USB mass storage class device. USB device properly when using a USB •...
  • Page 24 • To display the source control screen, page 14. • To change settings for video playback, page 20. Selects repeat playback mode. * * Displays the folder/track list. • REP: Repeats the current track. page 19) • FO-REP: Repeats all tracks in [3 8] Starts/pauses playback.
  • Page 25: Listening To The Ipod/Iphone Device

    Listening to the iPod/iPhone device Preparation • Connect iPod/iPhone. ( page 82 ) – When connecting iPhone/iPod touch, turn off App beforehand; otherwise the playback may not be started after Audiobooks Selects the speed of connection. audio books. • Use the following cables: Artwork Shows/hides the iPod –...
  • Page 26 • For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or is slow, reset your iPod/iPhone. • For the latest compatible list and software version of iPod/iPhone, see: www.kenwood.com/cs/ce/ipod...
  • Page 27: Selecting An Audio/Video File From The Menu

    Selecting an audio/video file Controlling playback from from the menu the iPod/iPhone You can play back the audio/video files or use App by operating iPod/iPhone itself instead of the unit. Select the menu (audio or video) (1), a category (2), then a desired item (3).
  • Page 28: Listening To The Radio

    Listening to the radio • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. [P1] – [P6] • Selects a stored station. [PTY] * Enters the PTY search mode. (Press) page 30) • Stores the current station. [AM] Selects AM band.
  • Page 29 Changing the display information Manual presetting Tune in to a station you want to preset. Select a preset number. (Hold) The station selected in step is stored. Selecting a preset station Storing stations in memory You can preset six stations for each band. Automatic presetting —...
  • Page 30 Activating/deactivating TI The following features are available only Standby Reception for FM RBDS stations. Searching for FM RBDS program—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code. TI indicator TI Standby Reception Lights in The unit will temporarily white switch to Traffic Information...
  • Page 31: Listening To The Siriusxm™ Satellite Radio

    Listening to the SiriusXM™ Satellite Radio (Only for DDX790/DDX770/DDX470/DDX370) Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. To start listening to the SiriusXM™ Satellite Radio, a SiriusXM Connect Vehicle Tuner (sold separately) and subscription are required.
  • Page 32 Radio activation When the following screen appears, press [Enter]. SiriusXM Satellite Radio operation requires the connection of the optional SiriusXM Connect Vehicle Tuner (sold separately). To activate the SiriusXM Connect Vehicle Tuner, you will need the Radio ID. Make a note of your Radio ID. For each SiriusXM Connect Vehicle Tuner, peculiar Radio ID is assigned.
  • Page 33 Changing the display Selecting a preset channel information Selecting a channel directly Storing channels in memory You can preset six channels for each band. Enter a channel no. (1), and (24 in total) then confirm (2). Tune in to a channel you want •...
  • Page 34 Channel List Displaying information on Select a category (1) and then a channel channels (2). You can obtain information on channels or select a category and then a channel. – To list all the channels, select [All Channels]. – Pressing the info change button Select [Preset List] or [Channel above the list displays information in List].
  • Page 35 Using the Replay function Progress Shows the remaining capacity (gray) and the amount of You can temporarily record the broadcast recorded data (blue). If you from the current time, and replay the have already recorded fully, recorded data. the entire bar is indicated in •...
  • Page 36 Setting the reception Enter a new four-digit code restrictions (1), and then confirm (2). • To clear the entry, press [Clear]. Display the <SiriusXM Mode> screen to • To cancel setting the code, press configure the settings. [Cancel]. Setting the parental lock You can set the parental lock or parental mature lock in order to, for example, restrict Enter the four-digit code and...
  • Page 37 Activating the parental lock on each channel Skipping unwanted channels This parental control option allows you If you do not want to receive some channels, to pick the channels to be locked by the you can skip them. parental control feature. Activating the channel skipping Enter the parental code.
  • Page 38: Pandora® Operations

    Pandora® operations (Only for DDX790/DDX770/DDX470/DDX370 ) • You can operate Pandora using the remote controller. Only playing, pausing, and skipping are available. • Install the latest version of the Pandora application on your iPhone/iPod touch/Android/ BlackBerry. Displays the list selecting Registers the current song as screen.
  • Page 39 Selecting a device to connect for Select a station from the list. Pandora reception (Only for DDX790/ On the Station List: DDX770/DDX470 ) You can connect the device for Pandora reception either with Bluetooth connection or wired connection. Select the connecting method.
  • Page 40 Requirements for Pandora® iPhone or iPod touch • Use an Apple iPhone or iPod touch running under iOS3 or later. • Install the latest version of the Pandora application on your iPhone or iPod touch. (Search for “Pandora” in the Apple iTunes App Store to find and install the most current version.) •...
  • Page 41: Using Other External Components

    Using other external components AV-IN To display the source control screen, page 14. [MODE] Changes the AV-IN name. • Press [2] or [3] to select an AV-IN name. • This setting does not affect the source name “AV-IN 1”/ “AV-IN 2” displayed on <Top Menu>.
  • Page 42: Using The External Navigation Unit

    Using the external navigation unit (Only for DDX7070BT/DDX4070BT/DDX3070) You can connect a navigation unit ( KNA-G630 : optional accessory) to the navigation input terminal so that you can view the navigation screen. ( page 83 ) The navigation guidance comes out of the front speakers even when you listen to an audio source.
  • Page 43: Sound Adjustment

    The adjustments are stored and <User> is activated. Storing your own • You can also display the <Tone> screen by pressing AUD ( for DDX790/DDX770/ adjustment DDX7070BT/DDX370/DDX3070 ) or VOL/ Customizing preset sound mode ATT/AUD knob ( for DDX470/DDX4070BT ) on the monitor panel.
  • Page 44: Adjusting The Crossover Frequency

    Adjusting the sound precisely Adjusting the crossover frequency Perform steps “Selecting a preset sound On <Top Menu>: mode,” then... Select the item to adjust, then Adjust the sound of each make adjustment. band. Flat Changes level of Bass/ Middle/Treble to 0. Frequency Selects frequency.
  • Page 45: Changing The Display Design

    Changing the display design You can change the background and panel color. To select a panel color On <Top Menu>: Making your own color adjustment • You can make your own color adjustment only when <User> is selected. Select an item to change ([Background] or [Panel Color]).
  • Page 46 Using your favorite scene as the Adjust the image. background While playing a video or JPEG, you can capture an image and use the captured image as a background. • You cannot capture copyrighted content and images from iPod/iPhone . •...
  • Page 47: Setting For Video Playback

    Setting for video playback You can change the setting for video playback. Picture adjustment Adjust the picture (–15 to +15). You can adjust the picture quality. Display the adjustment menu. Adjustable only when the incoming signal is NTSC. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off).
  • Page 48: Changing The Aspect Ratio

    Changing the aspect ratio Zooming picture You can change the aspect ratio for video You can zoom the picture (<Zoom1> to playback. <Zoom3>). • When <Aspect> is set to <JUST> or <Auto> ( the left column), the picture is zoomed with the aspect ratio of the <FULL>...
  • Page 49: Using A Rear View Camera

    • To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera, page 83. Activating the rear view To display the picture from the rear view camera manually camera DDX790/DDX770/ On <Top Menu>: DDX7070BT DDX470/ DDX4070BT * DDX370/DDX3070 * To deactivate, select [OFF].
  • Page 50: Setting Menu Items

    Setting menu items • You cannot change <Audio> settings when [STANDBY] is selected on <Top Menu>. page 12) Menu item Selectable setting/item Initial: Underlined Fader/Balance Fader : Adjust the front and rear speaker output balance. ♦ F6 to R6; Initial 0 •...
  • Page 51 Select the color system of the external monitor. ♦ NTSC/PAL Angle Adjust the panel angle. ( page 11) Only for DDX790/ DDX770/DDX7070BT “Please power off” appears when the setting is changed. Turn off the power, then turn on to enable the change.
  • Page 52 42) Only for DDX7070BT/ DDX4070BT/DDX3070 NAV Mute Attenuate the sound coming out of speakers other than the front speakers during navigation guidance. Only for DDX790/ DDX770/DDX470/ DDX370 Language * Select the text language used for on-screen information. ♦ English/Spanish/French/German/Italian/Dutch/...
  • Page 53 You can memorize, recall, clear, or lock the settings you have made. ( page 54) Bluetooth Setup Configures settings for using a Bluetooth device, such as Only for DDX790/ connection and other general operations. ( page 58) DDX770/DDX7070BT/ DDX470/DDX4070BT OEM Bluetooth...
  • Page 54: Memorizing/Recalling The Settings

    Memorizing/recalling the Locking the settings settings You can lock the settings to prevent them from being changed. You can memorize the settings changed • is shown beside the settings that can in the <Setup> menu and recall the be locked. memorized settings anytime.
  • Page 55: Bluetooth Operations

    BLUETOOTH OPERATIONS (Only for DDX790/DDX770/DDX7070BT/DDX470/DDX4070BT ) Information for using Bluetooth® devices • While driving, do not perform complicated operations such as dialing the numbers, using phonebook, etc. When you perform these operations, stop your car in a safe place. • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.
  • Page 56: Registering New Bluetooth Device

    Connecting Bluetooth devices Registering a new Bluetooth Pairing a Bluetooth device using a PIN code (for Bluetooth2.0) device • The maximum digit of the PIN code that When you connect a Bluetooth device to the can be set is 16. unit for the first time, make pairing between On <Top Menu>: the unit and the device for registration.
  • Page 57: Connecting/Deleting Registered Bluetooth Device

    (A2DP)] for Bluetooth audio player, and [PANDORA (SPP)] for Pandora*) (2). Confirmation message appears. Press [Yes]. [PANDORA (SPP)] appears only for DDX790/ DDX770/DDX470 . • Selectable items depend on the device you are operating. • If you connect a device while another...
  • Page 58: Displaying Bluetooth Setup Screen

    • Enter a new PIN code, then press [Enter]. Device Name Shows the device name to be shown on the Bluetooth device — “KENWOOD BT MM-7U2. ” Device Address Shows the device address of the unit. Auto Connect ♦ ON : The connection is automatically established with the last connected Bluetooth device when the unit is turned on.
  • Page 59: Using The Bluetooth Mobile Phone

    • To adjust the volume of calls/earpiece, use displayed. ( page 49) VOLUME (for DDX790/DDX770/ DDX7070BT ) or VOL/ATT/AUD knob (for When <Auto Response> is set to [On] DDX470/DDX4070BT ) on the monitor The unit answers the incoming call panel.
  • Page 60: Making A Call

    • You can enter up to 32 numbers. On <Top Menu>: Voice dialing • Available only when the connected mobile phone has the voice recognition system. Select a method to make a DDX790/DDX770/ DDX470/ call. DDX7070BT DDX4070BT* Speak the name you want to call.
  • Page 61 Using the phonebook/call lists Select the initial. • If the initial is not a letter or number, press [Others]. Outgoing From dialled call list. Select a phone number from Incoming From received call list. the list. Missed From missed call list. Phonebook From phonebook.
  • Page 62 Presetting the phone Copying the phonebook numbers You can copy the phonebook memory of a mobile phone into the unit (up to 400 You can preset up to 6 phone numbers. entries). On <Top Menu>: On <Top Menu>: Select an item from phonebook/call lists.
  • Page 63 Deleting the phone number About mobile phones compatible entries in the unit with Phone Book Access Profile (PBAP) Display the phonebook/call If your mobile phone supports PBAP, you list you want to delete. page can display the phonebook and call lists on the touch panel screen when the mobile phone is connected.
  • Page 64: Settings For Bluetooth Mobile Phone

    Settings for Bluetooth mobile phone On <Top Menu>: Menu items Selectable setting/item Initial: Underlined Phone Shows the connected phone device name. Device ♦ ON Auto : The unit answers the incoming calls automatically in 5 Response seconds. ♦ OFF : The unit does not answer the calls automatically. Answer the calls manually.
  • Page 65: Using The Bluetooth Audio Player

    Using the Bluetooth audio player • To register a new device, page 56. • To connect/disconnect a device, page 57. • The operation buttons, indications and information displayed on the screen differ depending on the connected device. Starts playback. Pauses. [4][¢] •...
  • Page 66: Using The Remote Controller Overview

    Overview DDX7070BT/DDX4070BT/DDX3070 : This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. DDX790/DDX770/DDX470/DDX370 : Optional Remote Controller KNA-RCDV331 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller.
  • Page 67: Operations From The Remote Controller

    Aspect ratio changes each time you press NAV/V.SEL this key. Switches to the navigation screen. OPEN Cursor key (Only for DDX790/DDX770/DDX7070BT ) Moves the cursor when displaying menu. Adjusts the panel angle. The panel angle changes each time you press this key.
  • Page 68 DVD/VCD (DVD mode) VCD 1.X, VCD 2.X (PBC OFF) Track search and file search Track number Selects the track or file to be played. Cancel VCD 2.X (PBC ON) Track number Cancel Play/Pause Once you have switched to the direct search Pauses the track.
  • Page 69 SUBTITLE Track search and file search Switches the subtitle language. Selects the track or file to be played. Play/Pause ZOOM Pauses the track. Switches the zoom ratio each time you press Press again to resume playing. this key. Direct search Picture Angle Switches the picture angle each time you press this key.
  • Page 70 • To use preset tuning, press the number of Radio/SiriusXM (AUD mode) a programmed broadcast station. ( – Band switching Switches to bands received by the unit. • Press the direct tuning key first, then specify the frequency of the station to receive.
  • Page 71: Reference Maintenance

    REFERENCE Maintenance Caution on cleaning the unit To keep discs clean Do not use A dirty disc may not play correctly. any solvent If a disc does become dirty, wipe (for example, it with a soft cloth in a straight line thinner, benzine, from center to edge.
  • Page 72: More About This Unit

    More about this unit File playback Playing MP3/WMA/WAV/AAC files • This unit can play back files with the Playing DivX files extension code <.mp3>, <.wma>, <.wav>, (Only for DDX7070BT/DDX4070BT/DDX3070) or <.m4a> (regardless of the letter case— • This unit can play back DivX files with the upper/lower).
  • Page 73 Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/Front Preout/Rear Preout) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. Language codes (for DVD/DivX language selection) Code Language Code Language Code Language Code Language Afar...
  • Page 74: Troubleshooting

    • Connect another USB device. “Panel Mecha Error” The panel does not work properly. Reset the unit. “No Navigation” No navigation unit is connected. Bluetooth (Only for DDX790/DDX770/DDX7070BT/DDX470/DDX4070BT ) Message Remedy/Cause “No BT Dongle” The Bluetooth adapter (KS-UBT1) is removed.
  • Page 75 Pandora (Only for DDX790/DDX770/DDX470/DDX370) Message Remedy/Cause “Check Device” • Pandora application on your iPhone/iPod touch/smartphone is not started up. • Pandora application is not installed in the connected device. • Error occurs on the Pandora application. • You have not been signed in the Pandora.
  • Page 76 No picture appears on the • Turn on the video component if it is not on. screen. • Connect the video component correctly. • When “AV-IN2” is selected as the source, set <AV Input> to [AV-IN]. For DDX790/DDX770/DDX470/DDX370 , purchase KNA-RCDV331 separately.
  • Page 77 Symptom Remedy/Cause No sound comes out of the • Disconnect the iPod/iPhone, then connect it speakers. again. • Select another source and then reselect “iPod”. The iPod/iPhone does not turn • Check the connecting cable and its connection. on or does not work. •...
  • Page 78 Symptom Remedy/Cause Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or • Reduce the distance between the unit and the skipped while using a Bluetooth Bluetooth audio player.
  • Page 79: Accessories/Installation Procedure

    • Only for DDX790/DDX770/DDX7070BT: If the 2 Make the proper input and output wire console has a lid, make sure to install the unit so connections for each unit.
  • Page 80 • If the fuse blows, first make sure the wires are not DDX790/DDX770/DDX7070BT only touching to cause a short circuit, then replace the 1 Before installation, remove the screws. old fuse with one with the same rating. ⁄ Do not use the removed screws for •...
  • Page 81: Connecting Wires To Terminals

    To the terminal that is grounded when either the Brown telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation (Mute control wire) manual.) Light blue/Yellow To use the steering wheel remote control feature,...
  • Page 82: Connecting A Usb Device/Ipod/Iphone

    Connecting a USB device/iPod/iPhone For DDX790/DDX770/DDX7070BT iPod (commercially available) USB device (commercially available) CA-U1EX* (Optional Accessory) USB terminal 0.8 m (2.6 ft) KCA-iP202 (Optional Accessory) iPod/Audio Visual input 2 (iPod/AV-IN2) (iPod/AV Input 2 switchable) 1.8 m (5.9 ft) * Use CA-U1EX for extending the cable if necessary. (Max 500 mA, 5V)
  • Page 83: Connecting Other Products

    Navigation System (Optional Accessory) DDX7070BT/DDX4070BT/DDX3070 only ⁄ Navigation units that can be connected to this unit (as of December, 2012): KNA-G630 For latest information, access the www.kenwood.com/cs/ce/. Rear View Camera Input • Visual input (Yellow) Audio/Visual Output • Visual output (Yellow) •...
  • Page 84: Installing/Removing The Unit

    Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and Accessory 5 attach it in place. Removing the Trim Plate For more stable attachment the unit (DDX790/ (DDX470/DDX4070BT/ DDX770/DDX7070BT only) DDX370/DDX3070 only) Engage the catch pins on the extraction...
  • Page 85: Removing Unit

    Installing the Microphone (DDX470/DDX4070BT/ Unit (DDX790/DDX770/ DDX370/DDX3070 only) DDX7070BT/DDX470/ DDX4070BT only) • For removing DDX790/DDX770/DDX7070BT, page 80. Check the installation position of the microphone (accessory 9). Remove the trim plate by referring to Remove oil and other dirt from the the removal procedure in the section installation surface.
  • Page 86: Specifications

    20 Hz – 20,000 Hz AVRCP (Audio/Video Remote Control Profile), : 0.010% (1 kHz) GAP (Generic Access Profile), SDP (Service Discovery Profile), : 99 dB (DVD-Video 96 kHz) SPP (Serial Port Profile)* Only for DDX790/DDX770/DDX470 . : 98 dB (DVD-Video 96 kHz)
  • Page 87 : 530 kHz – 1 700 kHz : 10 A : 28 dBμ : 182 × 111 × 160 mm 7-3/16 × 4-3/8 ×6-5/16 inch Video section (DDX790/DDX770/DDX7070BT ) 182 × 112 × 163 mm 7-3/16 × 4-7/16 × 6-7/16 inch : NTSC/PAL (DDX470/DDX4070BT/DDX370/ DDX3070 ) : 1 Vp-p/75 Ω...
  • Page 88 • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • The “AAC” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
  • Page 89: Ks-Ubt1 (Usb Bluetooth Adapter)

    Power Consumption: 54.3 mA/5 V (max.) • This adapter has been designed exclusively Dimensions (L × W × H): for use with Kenwood car receivers. Do not 15 mm × 19 mm × 5.6 mm use this adapter with any other car receiver.
  • Page 90 FCC WARNING IC (Industry Canada) Notice This equipment may generate or use radio This device complies with Industry Canada licence-exempt RSS standard(s). frequency energy. Changes or modifications to this equipment may cause harmful Operation is subject to the following two interference unless the modifications are conditions: (1) This device may not cause interference,...
  • Page 93 Dear Customer, panneau d'endommagement. Thank you for purchasing this kenwood product. As mentioned in the pages of this booklet, warranty is only Aten~ao: valid in the countries listed. If your country is not listed please contact your retailer for...

This manual is also suitable for:

Ddx770Ddx7070btDdx370Ddx3070Ddx470Ddx4070bt

Table of Contents