Disc - Kenwood DDX7019BT Instruction Manual

Disc

Disc
(Only for DDX7019BT/DDX7019BTM/DDX719WBT/DDX719WBTM)
• If a disc does not have a disc menu, all tracks on it will
be played repeatedly until you change the source or
eject the disc.
• For playable disc types, file types and other
information, see pages 55 – 57.
• If " " appears on the screen, the unit cannot accept
the operation you have tried to do.
– In some cases, without showing "
will not be accepted.
• When playing back a multi-channel encoded disc,
the multi-channel signals are downmixed.
Inserting a disc
DDX7019BT/DDX7019BTM
Then, on the <Angle Adjust> screen, touch
[ M DISC EJECT] to open the monitor panel, then
insert a disc.
Label side up
E.g. Inserting a disc for DDX7019BT
12 ENGLISH
DDX719WBT/DDX719WBTM
Then, on the pop-up short-cut menu, touch [Angle] to
open the monitor panel, then insert a disc.
", operations
E.g. Inserting a disc for DDX719WBT
After the disc is loaded, the monitor panel closes
automatically.
The source changes to "DISC" and playback starts.
• The IN indicator lights up while a disc is inserted.
Label side up
Ejecting a disc
DDX7019BT/DDX7019BTM
Then, on the <Angle Adjust> screen, touch
[ M DISC EJECT].
DDX719WBT/DDX719WBTM
Then, on the pop-up short-cut menu, touch [Angle].
• When removing a disc, pull it out horizontally.
• You can eject a disc while playing another AV source.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
To close the monitor panel:
DDX7019BT/DDX7019BTM
M
Press on the monitor panel after removing the disc.
DDX719WBT/DDX719WBTM
Touch [Close] after removing the disc.