Getting Started; Initial Settings; Setting The Security Code - Kenwood DDX7019BT Instruction Manual

Getting Started

Getting Started

Initial settings

When you power on the unit for the first time, the
<Initial SET-UP> screen appears.
Perform the initial settings.
E.g. Initial settings screen
Once completed, a warning message appears. Touch
[Agree] to display the Home screen.
[Language]*1
Select the text language used for on-screen
information.
Touch [Language select], then select the language.
• American English(en)/British English(en) (Initial)/
Nederlands(nl)/Français(fr)/Deutsch(de)/
Italiano(it)/Español(es)/(ar)
Português(pt)/Čeština(cs)/Polski(pl)/Magyar(hu)/
Руccĸий(ru)/ (th)/Türkçe(tr)/
(zh)/(he) /(fa) /Bahasa Melayu
(ms)/Bahasa Indonesia(id)
6 ENGLISH
[Clock] (Page 7)
Set the calendar and clock time.
Make the settings for [Clock], [Time Zone] or [Clock
Adjust].
[Display] (Page 39)
Make the settings to adjust the display.
[Camera] (Page 42)
Make the settings to display the picture from the
connected view camera.
[DEMO]*2
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
*1 For DDX7019BT/DDX7019BTM/DDX719WBT/DDX719WBTM:
"Please Power Off" appears when the setting is changed.
To enable the change,
DDX7019BT/DDX7019BTM:
– When <Manual Power OFF> is set to [AV OFF], turn off the
ignition switch, then turn on the ignition switch. (Page 43)
– When <Manual Power OFF> is set to [Complete OFF], turn
off the power of the unit, then turn on the power of the unit.
(Page 43)
DDX719WBT/DDX719WBTM:
– Turn off the ignition switch, then turn on the ignition switch.
/Ελληνικά(el)/
*2 Some features are not selectable when [ON] is selected.
(zh)/

Setting the security code

You can set a security code (four-digit number of your
choice) to protect your receiver system against theft.
• Once you set the security code, you are required to
input the security code if you have disconnected the
unit from the battery.
Enter the security code you have set in step 3, then
touch [Enter] when you reconnect the battery.
1
Display the Home screen.
DDX7019BT DDX719WBT
DDX7019BTM DDX719WBTM
DMX7019BT DMX719WBT
DMX7019BTM DMX719WBTM
2
Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch as follows:
[Security]  [Security Code Set]