Kenwood DDX7019BT Instruction Manual page 18

USB USB
DMX7019BT/DMX7019BTM/DMX719WBT/
DMX719WBTM
The unit is equipped with two USB input terminals.
You can connect two USB devices.
USB device
(commercially available)
(USB2) 5 V 1.5 A:
You can also connect to the
USB2 input terminal.
(USB1)
5 V 1.5 A
16 ENGLISH
Switching the USB devices
(Only for DMX7019BT/DMX7019BTM/
DMX719WBT/DMX719WBTM)
You can switch between the USB devices connected
to the USB input terminals from the rear panel.
On the source control screen, touch as follows:
The playback control screen of the next drive appears
Rear panel
and playback starts if there are playable files on the
USB device.
Performing the above operations will also change the
drive of the following devices:
• Selected internal or external memory of a
smartphone (Mass Storage Class).
• Selected drive of a multiple drive device.
Playback operations
Playback information and key operation
• For playback information, see "Source control screen"
on page 9.
• For key operations on the touch panel, see "Common
operation keys on source control screen" on
page 10.
• All tracks in the USB device will be played repeatedly
until you change the drive, change the source or
disconnect the USB device.
Selecting a folder/track on the list
1
Display the folder/track list.
On the source control screen, touch as follows:
2
Select the list type.
3
Select the desired track.
• Repeat the procedure until you select the desired
track.
• For details about the list operation, see
page 11.
From <Category List>:
1 Select the file type ([ ]: audio/[
2 Select a category, then the item in the selected
category.
]: video).