Print Quality - Ricoh FAX1120L Service Manual

10 October, 2002
Error Message
POLLING ERROR
POWER FAILURE
RECEIVE ERROR
RETRY REDIAL ?
SEND ERROR
TONER EMPTY
TONER LOW
WARMING UP

4.3 PRINT QUALITY

No. Roller
1 OPC Drum
2 Charge Roller
3 Supply Roller
4 Develop Roller
5 Transfer Roller
6 Heat Roller
7 Pressure Roller
Description
The remote fax machine you want
to poll is not ready to respond to
your poll. Or when setting up to poll
another fax machine, you have
used an incorrect poll code.
A power failure has occurred.
A fax has not been received
successfully.
The machine is waiting for a
specified time interval to redial a
previously busy station.
Your fax has not gone through
successfully.
The toner cartridge has run out.
The machine stops.
The toner is almost empty.
The printer is warming up and is
off-line.
Abnormal image
period
75.4 mm
37.7 mm
26.8 mm
31.6 mm
47.1 mm
50.1 mm
50.2 mm
The remote operator should
know in advance that you are
polling and have their fax unit
loaded with the original
document.
Enter the correct poll code.
If documents have been stored
in the memory, a "Power Failure
Report" will be automatically
printed when the power is
restored.
A problem with the facsimile
communications has occurred.
Ask the sender to try again.
You can press Start/Enter to
immediately redial, or Stop to
cancel the redial operation.
A problem with the facsimile
communications has occurred.
Try again.
Replace with a new toner
cartridge.
Take out the toner cartridge and
gently shake it. By doing this,
you can temporarily re-establish
the print quality.
Wait until the printer is on-line.
Kind of abnormal image
• White spot on black image
• Black spot
Black spot
Horizontal density band
Horizontal density band
Black side contamination/
transfer fault
Black spot, White spot
Black side contamination
4-3
PRINT QUALITY
Solution