Pickup Roller Ass'y - Ricoh FAX1120L Service Manual

PICKUP ROLLER ASS'Y

3.18 PICKUP ROLLER ASS'Y
1. Before removing the pickup Roller Ass'y, you should remove:
– OPE cover (☛ 3.2)
– Rear cover (☛ 3.12)
– Top cover (☛ 3.13)
– LSU (☛ 3.15)
2. Unplug all connectors from the engine
board.
3. Remove the four screws securing the upper
plate.
4. Remove the upper plate as shown.
5. Remove both screws. And remove the
roller from the plate.
NOTE: When reassembling the pickup
roller, make sure that the right end
of the pickup roller fits into pickup
gear shaft.
Upper Plate
Pick-up gear shaft
H911R935.WMF
3-14
10 October, 2002
H911R932.WMF
H911R934.WMF
H911R933.WMF