Preparation - Bosch FLEXIDOME IP panoramic 6000 Series Installation Manual

12 en | Planning
4.3

Preparation

Before installation, prepare and plan the installation process and materials needed.
Pre-requisites
–
–
–
2019-07 | V01 | DOC
Quantity Component
1 Conduit hole adapter rubber: for diameters less than M20 (1/2
in.)
1 Screw
1 Washer
2 Grommet (plus 1 spare)
1 Desiccant bag
Note: Do not open the bag before it is necessary to use its
content.
1 TR20 bit
1 Quick installation guide
1 Safety instructions
3 Identification label stickers
The components are removed from the box. Make sure that all parts are included and are
not damaged.
The PoE cable is installed. Make sure that the PoE cable is less than 300 mm (11.8 in.)
long from the point of installation of the device.
The necessary material and equipment:
– To guarantee the IK10 standard, 4 screws M5 and mounting plugs M5 are necessary.
For installation with conduit, 5 screws M5 and mounting plugs M5 are necessary.
– Appropriate size power drill.
– Screwdriver and bit holder for TR20 bit.
Installation manual
FLEXIDOME IP panoramic 6000/7000 - outdoor
Bosch Security Systems B.V.