Bosch FLEXIDOME IP panoramic 6000 Series Installation Manual page 21

FLEXIDOME IP panoramic 6000/7000 - outdoor
2.
3.
4.
5.
6.
7.
Bosch Security Systems B.V.
Use an appropriate size drill to open the five holes marked before.
Install the five mounting plugs on the surface.
Select the applicable conduit hole adapter and install the conduit plate hole adapter on
the conduit plate:
– If the conduit is M25 (0.75 in), use the conduit plate adapter with the larger hole
(mounted by default).
– If the conduit is M20 (0.50 in), use the conduit plate adapter with the smaller hole
– If the cable duct diameter is smaller than M20 (0.50 in), use the conduit plate
adapter with the larger hole. Then, puncture a hole in the rubber and install it on the
conduit plate adapter and conduit plate.
Put the PoE cable through the hole of the conduit plate.
Put the conduit plate in position on the surface and attach it with the washer and screw.
Put the conduit cover on the conduit plate and attach it with the screw.
Installation manual
Installation | en 21
2019-07 | V01 | DOC