Installation With Conduit - Bosch FLEXIDOME IP panoramic 6000 Series Installation Manual

20 en | Installation
5.3

Installation with conduit

Notice!
If NDS-6004-F180E or NDS-7004-F180E are installed on a wall, it is necessary that the arrow
on the device points up. This will make sure that the image is shown horizontally and in the
correct angle.
To install the device with the use of the conduit:
1.
2019-07 | V01 | DOC
Use the mounting template supplied to mark the position of the five holes. Make sure that
the final position is correct.
Note: Make sure that the cable duct opening is facing the conduit plate installation area.
Installation manual
FLEXIDOME IP panoramic 6000/7000 - outdoor
Bosch Security Systems B.V.