Configuration; Browser Connection; Establish The Connection; Protected Network - Bosch FLEXIDOME IP panoramic 6000 Series Installation Manual

FLEXIDOME IP panoramic 6000/7000 - outdoor
6

Configuration

6.1

Browser connection

A computer with Microsoft Internet Explorer is used to receive live images, control the unit,
and replay stored sequences. The unit is configured over the network using the browser.
6.1.1

Establish the connection

The unit must have a valid IP address to operate on your network and a compatible subnet
mask.
By default, DHCP is pre-set at the factory to On plus Link-Local so a DHCP server assigns an
IP address or, if no DHCP server is available, a link-local address (auto-IP) is assigned within
the range 169.254.1.0 to 169.254.254.255.
You can use IP Helper or Configuration Manager to find the IP address. Download the software
from http://downloadstore.boschsecurity.com.
1.
2.
3.
IP Helper
The IP Helper tool is a free PC application that makes it easy to detect Bosch cameras and
devices on your network.
6.1.2

Protected network

If a RADIUS server is used for network access control (802.1x authentication), the unit must
be configured first. To configure the unit, connect it directly to a computer using a network
cable and configure the two parameters, Identity and Password. Only after these have been
configured can communication with the unit via the network occur.
6.2

Bosch Video Client

The Bosch Video Client is a free Windows application to view, operate, control, and administer
surveillance cameras. It can be downloaded from:
http://downloadstore.boschsecurity.com/
The Configuration Manager, which is part of the Video Client, is a useful tool for locating the IP
addresses of cameras in your network. Refer to the relevant Operation Manual for more
information.
6.3

Video Security Client

Video Security Client
The Video Security Client is a free, easy-to-use video-surveillance application provided by
Bosch for local and remote monitoring of IP cameras and appliances. The software supports
up to 16 cameras.
The Video Security Client has extensive dewarping capabilities and can be used for client-side
dewarping as well as for viewing the available modes.
Bosch Security Systems B.V.
Start the Web browser.
Enter the IP address of the unit as the URL.
During initial installation, confirm any security questions that appear.
Installation manual
Configuration | en 29
2019-07 | V01 | DOC