Bosch FLEXIDOME IP panoramic 6000 Series Installation Manual page 16

16 en | Installation
8.
9.
10. If necessary, do a loop with the PoE cable on the hooks of the mounting plate.
11. Align the camera base with the mounting plate. If the device is mounted on a wall, make
12. Push the camera base against the mounting plate and turn the camera base clockwise
2019-07 | V01 | DOC
Push the grommet into the hole of the camera base, with both thumbs in opposite sides.
Make sure that the grommet is fully pushed.
Adjust the length of the PoE cable, as necessary.
sure that the arrow on the camera base points in the same direction as the arrow on the
mounting plate.
until a click is heard. Make sure that the camera base is secured.
Installation manual
FLEXIDOME IP panoramic 6000/7000 - outdoor
Bosch Security Systems B.V.